Custom modular homes,
configured in about an hour.
Pick your model, then make it yours — finishes, layout, glazing, insulation tuned to your climate, HVAC, even solar and batteries. Configured with a salesperson or our online configurator, then 3D-printed and built to your exact spec in the factory. From $24,900.
A custom home, without the custom-build chaos.
Traditionally, "custom" means architects, change orders, and a budget that drifts for a year. Azure flips that. You start from a proven 3D-printed model — studios from 100 sq ft up to 900 sq ft homes — and tailor it to your life in a single configuration session of about an hour, either with a salesperson or through the online configurator. Every choice you make is built into the unit at the factory, so what arrives on your site matches what you designed.
To be clear about scope: this is deep customization within Azure's printed model platforms, not blank-sheet bespoke architecture — and that's exactly what keeps pricing fixed from $24,900 and build times up to 70% faster than site-built construction. If you're weighing budgets first, start with our guide to how much modular homes cost, browse affordable modular homes, or see what's possible with modular homes under $100K. Planning a ground-up custom development or multi-unit project? That's our developer solutions team.
What you can customize.
Every option below is specified during your configuration session and built into the home at the factory — nothing is left as a retrofit for later.
Inside
- Interior finishes and fixtures, chosen by you
- Layout options within your model — e.g. the 720 sq ft home as one bedroom or two junior bedrooms
- Kitchen or kitchenette configuration
- Bathroom spec, up to 1.5 baths on the 900 sq ft model
- Electrical and plumbing fully installed at the factory
Outside & systems
- Glazing — window placement sized for your light and views
- Insulation customized to your destination's climate
- HVAC for year-round comfort
- Solar panels and battery storage for self-sufficiency
- Durable recycled-polymer printed shell — zero print waste
From your spec to your site, in five steps.
These are real durations from our production process — not estimates padded for marketing.
1. Configure
Choose model, layout, finishes, glazing, and systems — with a salesperson or the online configurator.
2. Print
Your home is robotically 3D-printed from recycled materials in as little as one day.
3. Factory finish
Electrical, plumbing, and your chosen interior finishes are installed in the factory.
4. Delivery
Your finished unit is transported to your site.
5. Install & hookups
On-site installation and utility hookups — then it's move-in ready.
What arrives matches what you designed.
Your configuration isn't a wish list handed to a site crew — it's the build file. The shell is printed robotically from recycled polymers (the equivalent of about 100,000 plastic bottles per 120 sq ft, with 0% print waste), then your finishes, glazing, and systems are installed in the same controlled factory environment.
That's why a custom Azure home doesn't carry custom-build risk: no weather delays, no trade scheduling, no finish quality that varies by crew. If you're comparing factory-built approaches, see how prefab modular homes work and what defines modern modular design.
One platform, very different homes.
The same model can leave the factory as four completely different homes — that's the point of configuring it yourself.
The off-grid owner
Solar panels with battery storage for self-sufficiency, insulation customized to a mountain or desert climate, and HVAC sized for the site. A printed shell that's sealed and durable enough for remote land where trades are hard to schedule.
The rental & glamping host
Finishes and glazing chosen to photograph well and command a premium nightly rate, with a kitchenette and full bath configured for guest turnover. Studios from $24,900 keep the payback math short.
The work-from-home professional
A backyard studio configured as a serious office — glazing for daylight, climate control for year-round use, and interior finishes that read as a workplace, not a shed.
The ADU landlord
A 360 to 900 sq ft backyard home configured as a long-term rental — up to two bedrooms and 1.5 baths, with durable finishes chosen for tenants. Browse the full Homes & ADUs lineup.
Configure your custom modular home.
Tell us your site and wish list — we'll walk you through the options and send fixed pricing, no obligation.
Same process, your outcome.
Kitchen + living, configured
Spa bathroom, your spec
Indoor-outdoor livingNot sure where to start customizing?
Book a free consultation — a specialist will match your site, climate, and budget to the right model and options. Loan pre-qualification is available through our partner Acorn Finance.
Custom modular home FAQs.
How custom is a custom Azure modular home, really?
You customize within Azure's proven 3D-printed model platforms — studios from 100 sq ft to homes up to 900 sq ft. Finishes, layout options, glazing, insulation, HVAC, and solar are all yours to specify; the printed structural platform itself stays fixed. That honest trade-off is what keeps pricing fixed and delivery up to 70% faster than a bespoke site build. For fully custom or multi-unit developments, our developer solutions team handles ground-up projects.
How long does it take to configure a custom modular home?
About one hour. You can configure your unit with an Azure salesperson or use the online configurator on your own — choosing model, layout, finishes, glazing, and systems in a single session. That configuration becomes the exact spec the factory builds to.
Can the insulation be customized for my climate?
Yes. Insulation is customized to your destination's climate — a unit headed to a snowy mountain site is specified differently from one going to the desert — and paired with HVAC sized for year-round comfort, all installed in the factory before delivery.
Can I configure my modular home to be off-grid?
Yes. During configuration you can add solar panels with battery storage for self-sufficiency, alongside climate-tuned insulation and HVAC. Because the sealed recycled-polymer shell is finished entirely in the factory, it suits remote sites where scheduling trades is difficult.
Does customizing change the price or the timeline?
Your options set the price — starting at $24,900 for a studio — but once configured, the price is fixed rather than open-ended like a site-built custom home. The timeline barely moves: printing takes about a day and factory finishing 4–15 days regardless of your choices, followed by 1–2 days of delivery and 1–4 days of installation.
What if I want a fully bespoke design or a multi-unit project?
Azure's retail lineup customizes within existing model platforms. For ground-up custom developments — hotel and glamping resorts, multi-unit housing, or projects needing unique architecture — Azure works with developers directly through its developer solutions program, applying the same 3D-printing technology at project scale.
More on Azure modular homes.
Ready to build it your way?
Tell us about your site, climate, and must-haves, and we'll send model options, fixed pricing, and lead times. We respond to every inquiry within one business day.
18101 S Figueroa St
Gardena, CA 90248