Triple wide modular homes,
explained honestly.
What a triple-wide actually is, what the market really charges for one, and how it stacks up against double-wides — plus when a compact 3D-printed modular or a multi-unit setup is the smarter buy.
What counts as a triple-wide?
A triple-wide is a factory-built home delivered in three separate sections that are joined together on site. Each section travels on its own transport, then crews set the pieces on the foundation, bolt and seal the marriage lines, and finish the roof and siding where the sections meet. The result is a single-story home that typically runs 2,000–3,200+ sq ft with three to five bedrooms — the largest common format in the sectional-home world, one step up from double wide modular homes.
One distinction matters more than the marketing: “triple-wide” describes the shipping format, not the building code. A triple-wide manufactured home is built to the federal HUD code on a permanent steel chassis; a triple-wide modular home is built to the same state and local building codes as a site-built house and set on a conventional foundation. Modular versions generally appraise, finance, and resell more like traditional homes — and cost more up front. Ask every builder which one they're quoting, because the word “triple-wide” alone won't tell you.
Because three sections must travel and be craned into place, triple-wides also carry the heaviest logistics in the category: wide-load permits and escorts for each section, clear road access to the lot, a large flat pad, engineered foundation, and crane time. If your site is tight, sloped, or remote, those line items grow quickly — our modular home cost guide breaks down where budgets actually go.
Single, double, triple — and printed.
Typical figures for each sectional format, with Azure's 3D-printed single-section lineup alongside. Market figures are industry estimates — actual pricing varies by region, spec, and site.
What a triple-wide really costs.
Industry estimates for a complete triple-wide project in 2026 — not quotes. The base price is only the start; three sections mean three transports, a crane, and two seams to finish.
Rule of thumb from those estimates: a turnkey triple-wide project typically lands around $200,000–$450,000 depending on code type, region, and site. That's real square footage for the money — but only if you genuinely need 2,000+ sq ft on one pad and your lot can take three craned sections. Households that mainly need one more bedroom or a home office often get there for far less with a single wide modular home or a compact ADU on the property they already own.
One printed section, zero seams.
Azure doesn't build triple-wides — and we won't pretend otherwise. We robotically 3D-print each home as a single continuous section from recycled polymers (about 100,000 plastic bottles per 120 sq ft), so there are no marriage lines to bolt, seal, and maintain for decades.
The shell prints in as little as a day, finishes are installed in the factory over 4–15 days, and on-site installation takes 1–4 days — up to 70% faster than traditional construction, with 0% print waste. Our largest model, the 900, measures 18'×50' with two bedrooms and 1.5 baths.
When a project genuinely needs triple-wide-scale space, Azure scales beyond single printed units with the Professional Building System — Light Gauge Steel framing, Structural Insulated Panels, and 3D-printed recycled composite facades, fabricated off-site and assembled on your foundation by a General Contractor. It delivers larger and multi-story homes up to 70% faster and up to 30% cheaper than conventional construction, with enhanced fire resistance and a high R-value.
Not sure how much home you actually need?
Tell us your household, site, and budget — we'll give you a straight answer on whether Azure fits, with fixed pricing if it does.
Three ways to get there without a triple-wide.
Large-footprint needs don't always mean one large box. These are the routes our buyers actually take — each one printed, factory-finished, and financeable through our partner Acorn Finance.
One efficient main home
The Azure 900 (18'×50', 2 bed + 1.5 bath, from $219,900) covers many households that priced triple-wides out of habit, not need — on a far simpler pad. See all sizes on our Homes & ADUs page.
Main home + printed ADU
Pair an existing or new main house with a 360–720 sq ft Azure unit for guests, parents, or a rental. Two smaller structures often permit and place more easily than one 40-ft-wide footprint.
Developer configurations
Building serious square footage — family compounds, rental clusters, hospitality? Our developer solutions deliver multiple printed units on one site, fast.
Map your square footage with a specialist.
Book a free consultation — we'll compare a triple-wide plan against single-unit and multi-unit Azure options for your exact site.
Triple-wide FAQs.
What is a triple wide modular home?
It's a factory-built home shipped in three sections that are joined on a permanent foundation, typically totaling 2,000–3,200+ sq ft with 3–5 bedrooms. A triple-wide modular home is built to local building codes like a site-built house; a triple-wide manufactured home is built to the federal HUD code on a steel chassis. Confirm which one a builder is quoting before you compare prices.
How much does a triple-wide cost in 2026?
Industry estimates put the base home at roughly $150,000–$300,000+, with delivery, crane set, foundation, and site work adding $45,000–$140,000 — so most turnkey projects land around $200,000–$450,000 depending on code type, region, and site. These are market estimates, not Azure quotes; Azure's own single-section homes run $24,900–$219,900.
What's the difference between a triple-wide and a double-wide?
One section. A double-wide joins two sections (roughly 1,000–2,300 sq ft, one marriage line); a triple-wide joins three (2,000–3,200+ sq ft, two marriage lines). The third section adds space but also a third transport, more crane time, a wider foundation, and another long seam to seal and maintain — which is why triple-wides cost disproportionately more to deliver and set.
What does my site need for a triple-wide?
A lot that can physically receive three wide-load sections: clear road and turning access, room for a crane, a large graded pad, an engineered foundation spanning a 36–50 ft width, and utility hookups — plus wide-load transport permits for each section. Tight, sloped, or remote sites can make these costs climb steeply or rule the format out.
Does Azure Printed Homes sell triple-wides?
No. Azure specializes in compact single-section 3D-printed modular structures — studios from 120 sq ft up to the 900 sq ft, 18'×50' Azure 900. We'd rather tell you that plainly than stretch the definition. If you need triple-wide-scale space, we can help you evaluate a single larger Azure unit, a main-home-plus-ADU pairing, or a multi-unit developer configuration.
Can multiple Azure units replace one triple-wide?
Often, yes. Two or three printed units — say a 900 plus a 540 — can match a triple-wide's usable space while separating living, guest, and work zones, and each unit installs in 1–4 days without marriage lines or a 40-ft-wide crane set. For larger multi-unit projects, Azure's developer program handles planning and delivery.
Keep comparing modular sizes.
Get a straight answer on your project.
Tell us your space needs and site, and we'll tell you honestly whether one Azure unit, several, or a different format entirely is the right call — with fixed pricing and lead times. We respond within one business day.
18101 S Figueroa St
Gardena, CA 90248